MSK(Tianjin) International Trading CO.,Ltd
E-mail：keven@mskcnctools.com
Carbide Tungsten Steel Double flutes Straight Slot Milling Cutter
| Type | End Mill | Material | Tungsten Steel |
| Workpiece Material | Solid wood, hardwood, density board, particle board, ecological board, plywood | Numerical Control | CNC |
| Transport Package | Box | Flute | 2 |
| Coating | No | Specification | See the following table |
Feature:
- Double-flute straight groove milling cutter, sharp and wear-resistant, high efficiency, suitable for MDF, multilayer board, hardwood, solid wood, etc.
- Integral tungsten steel mirror grinding process, high hardness, high wear resistance, and constant sharpness
- German five-axis CNC grinder, high processing accuracy, sharp non-stick knife, high cutting finish
- Scientific blade and chip flute design, sharp and non-sticky, faster chip removal and higher work efficiency
- Universal round shank, chamfered design. Easy to use, with good compatibility, tightening does not slip, and higher efficiency
- Each one is individually packaged to protect the accuracy of the tool
Tool selection
To achieve the purpose you require, please try to use short-edged tools. Too long cutting edge or too long tool body will cause vibration and deflection during machining, resulting in tool damage and affecting machining quality. We recommend using a tool with a larger shank diameter.
Tool operation
- The woodworking milling cutter is specially designed for portable and desktop woodworking engraving machines, and cannot be used on machines such as electric drills and drill presses.
- The cutting tool can process a smooth surface on hardwood, softwood, synthetic board and other wood, but avoid processing metal materials such as copper and iron and non-wood materials such as sand and stone.
- Be sure to use the appropriate size of the jacket, the serious wear is not round enough and the inner hole with a taper jacket can not provide enough clamping force, it will cause vibration or twisting of the tool handle and flying off.
- Do not think that the new jacket must be safe and reliable. After the tool is clamped, it is found that the handle has uneven contact for a long time or has grooves, indicating slippage and deformation of the inner hole of the jacket. At this time, the jacket should be replaced immediately to avoid accidents.
| Flute Diameter (mm) | Flute Length(mm) | Shank Diameter(mm) | Length(mm) | |||
| 1 | 3 | 3.175 | 38 | |||
| 1.5 | 5 | 3.175 | 38 | |||
| 1.5 | 8 | 3.175 | 38 | |||
| 2 | 6 | 3.175 | 38 | |||
| 2 | 8 | 3.175 | 38 | |||
| 2 | 12 | 3.175 | 38 | |||
| 2 | 15 | 3.175 | 38 | |||
| 2 | 17 | 3.175 | 38 | |||
| 2.5 | 12 | 3.175 | 38 | |||
E-mail：keven@mskcnctools.com
Address：Block 6-49, No.12, Haitai Er Road, Huayuan Industrial Park, Binhai Hi-Tech Zone, Tianjin, China
MSK(Tianjin) International Trading CO.,Ltd Copyright © 2022 All rights reserved
Main products:Roughing End Mills,Spotting Drill Bits,Aluminium End Mill,Ball Nose Milling Cutter,End Mill With Radius,4 Flutes Square End Mill,Stainless Steel End Mill,Cnc Lathe Tool Metal Drilling Tool.
link: tj-ymfilter
tjymfilter
Chinese